Online Message

Leave your feedback or comments, and we may give you a sample

%{tishi_zhanwei}%

Have you learned the brake block self-test trilogy?

Have you learned the brake block self-test trilogy?

Have you learned the brake block self-test trilogy?

Sep 12,2024

Have you learned the brake block self-test trilogy?

Now there are still a lot of friends have a car brake self-test is not very familiar with the following to bring you the car self-test tips. The tip of the self-inspection trick is to introduce some brief self-inspection methods within the scope of his talents, so that even if the owner cannot replace or repair the vehicle himself, he can know more about the vehicle in a timely manner and be able to see and identify minor problems with the vehicle. When he can't afford to look at it all the time. 1. In terms of thickness, the thickness of new brake pads is generally about 1.5 cm. As the friction continues in use, the thickness will gradually become thinner. Professional and technical personnel advocate, when the thickness of brake lining is only the original thickness (about 0.5 cm) of 1/3, the owner should increase the frequency of self-inspection and ready to replace at any time. Of course, because of the hub design, some types of conditions do not have visual inspection, so the need to remove the tire to complete. Each brake lining has a raised mark on both sides. The thickness of the plate is about two to three millimeters, which is also the limit of replacing the thinner brake disc. If the thickness of the brake lining is parallel to the mark, a replacement is required. Thus, when the thickness of the brake pad is close to the symbol, the owner should always investigate and prepare. However, it is difficult to investigate accurately with the naked eye without removing the tires. At present, when a variety of brake pads are too thin, the hand brake light will be indicated on the instrument's orientation for easy self-examination.

Key words: